As an Amazon Associate I earn from qualifying purchases.1. Amana Tool
1/4-Inch Shank, Amana Tool 45204 Straight Plunge 2-Flute Carbide Tipped Router Bit
Amana Tool - 1/4-inch shank, 2-flute. Carbide tipped, industrial quality. Cutting diameter 1/4-Inch. 3/8-inch radius. Provides super clean cuts.
| Brand | Amana Tool |
| Manufacturer | Amana Tool |
| Height | 6.99 cm (2.75 Inches) |
| Length | 1.27 cm (0.5 Inches) |
| Weight | 0.02 kg (0.04 Pounds) |
| Width | 1.27 cm (0.5 Inches) |
| Part Number | 45206 |
| Model | 45204 |
2. Amana Tool
Amana Tool 45624-K SC Spektra Extreme Tool Life Coated V-Groove 60 Deg x 1/4 D x 31/64 CH x 1/4 Inch SHK 3-Flute Router Bit
Amana Tool - Specifications: diameter d: 1/4 angle a: 60 cutting height b: 31/64 Shank d: 1/4 Overall Length L: 2 B1: 7/32 Flutes: 3. Made in USA. 1/4 inch Shank.
3. Amana Tool
Signmaking and Lettering, Amana Tool RC-1147 V Groove Router Bit CNC Insert 60 Deg x 21/64 x 1/4 Inch Shank, Miter Fold Blade
Amana Tool - Solid-carbide insert knife – this cnc tool uses high-grade carbide router bit insert knives for cutting-edge tool performance and blade life. V groove router bit – the industrial v-groove router bit insert was specially designed to be used as a Miter Fold router bit to create the perfect joint and for Signmaking and Lettering.
Cutting accuracy – this cnc router bit has a secure locking screw system for safety and to maintain cutting accuracy.
Get two uses of each side – once the insert router knife shows signs of wear you can rotate the router blade for a brand new cutting edge. Industrial-quality tools – amana tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools. Industrial-quality.
4. Amana Tool
Amana Tool AMS-174 8-Pc General Purpose CNC Router Bit Collection 1/4 Inch Shank
Amana Tool - This provides longevity and produces cutting results of the highest quality. Naco offers approximately 4, while attractive, 500 Vickers for impressive solid hardne. Advantages of spektra coating: naco coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity.
Specifications: d Shank: 1/4. Coatings prevents high heat and oxidation which is detrimental to cutting tool performance Multi-colored hues, will dissipate upon use and yet coating will remain fully effective.
| Brand | Amana Tool |
| Manufacturer | Amana Tool |
| Height | 7.62 cm (3 Inches) |
| Length | 31.12 cm (12.25 Inches) |
| Weight | 0 kg (0 Pounds) |
| Width | 15.24 cm (6 Inches) |
| Part Number | AMS-174 |
5. Amana Tool
1/4 Shank, Amana Tool AMS-177-K 8-Pc CNC Router Bit Collection Featuring V-Grooves, Point Roundover and Multi-Purpose Spektra Bits
Amana Tool - Coatings prevents high heat and oxidation which is detrimental to cutting tool performance Multi-colored hues, will dissipate upon use and yet coating will remain fully effective. This provides longevity and produces cutting results of the highest quality.
Specifications: d Shank: 1/4. Naco offers approximately 4, while attractive, 500 Vickers for impressive solid hardne. Advantages of spektra coating: naco coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. Made in USA.
| Brand | Amana Tool |
| Manufacturer | Amana Tool |
| Height | 7.62 cm (3 Inches) |
| Length | 31.12 cm (12.25 Inches) |
| Weight | 0 kg (0 Pounds) |
| Width | 15.24 cm (6 Inches) |
| Part Number | AMS-177-K |
6. A.G.E. Series
3-Piece, A.G.E. Series by Amana Tool MD502 Raised Panel Door Making Carbide Tipped Router Bit Set with Back Cutter with 1/2-Inch Shank
A.G.E. Series - Laser cut Expansion Slots. Precision Ground. Precision, Heavy-Duty. Made in Germany. European Style Carbide Tips.
7. Amana Tool
Amana Tool RC-1102 Insert V-Groove 90 Deg x 3/4 CH x 1/2 Inch SHK CNC Router Bit
Amana Tool - Replaceable carbide knives to extend tool cutting life. Specifications: d diameter: 1-1/2 a angle: 90 b cutting height: 3/4 d shank: 1/2 overall length l: 3 a1: 45 b1: 1-1/16 Cutting Edges: 2 Max RPM: 18, 000 L1: 1-25/32 Flutes: 1 # of knives: 1.
Advantages of insert tooling: long lasting insert knives provide superior smooth quality cuts every time Quick and precise replacements of dull knives Due to insert accuracy tool life is extended Insert tooling allows for harder grades of carbide Special carbide grades for special applications Knives can be re-sharpened multiple times without affecting the original profile Cost effective solution compared to replacing brazed router bits.
Just replace the knives when dull or turn to sharper edge if applicable. Replaceable knives are as much as 4 times longer lasting than carbide tipped equivalent. 1/2 inch Shank.
| Brand | Amana Tool |
| Manufacturer | Amana |
| Height | 3 cm (1.18 Inches) |
| Length | 12 cm (4.72 Inches) |
| Weight | 0 kg (0.01 Pounds) |
| Width | 9 cm (3.54 Inches) |
| Part Number | RC-1102 |
8. Amana Tool
Amana Tool 46052-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia x 3/4 CH x 1/4 SHK 2-1/2 Inch Long Down-Cut Router Bit
Amana Tool - Made in USA. Specifications: direction: up-cut d diameter: 1/4 b cutting Height: 3/4 d Shank: 1/4 Overall Length L: 2-1/2 Flutes: 2.
9. Amana Tool
1/4-Inch Shank, Amana Tool 45780 Carving and Engraving 2-Flute Carbide Tipped Router Bit
Amana Tool - For extra-fine carving and lettering details. 82-1/2-degree angle. 1/4-inch shank, 2 flute. Cutting diameter 3/16-Inch. Carbide tipped, industrial quality.
| Brand | Amana Tool |
| Manufacturer | Amana Tool |
| Height | 1.91 cm (0.75 Inches) |
| Length | 7.62 cm (3 Inches) |
| Weight | 0 kg (0 Pounds) |
| Width | 1.91 cm (0.75 Inches) |
| Part Number | 45780 |
| Model | 45780 |
10. Amana Tool
Amana Tool 47104 Flush Trim 1/2-Inch Diameter by 1-Inch Cutting Height by 1/4-Inch Shank 2-Flute Router Bit
Amana Tool - Carbide tipped, Industrial Quality. Excellent for template work. Cutting diameter 1/2-Inch. 1-inch cutting Height. 1/4-inch Shank.
| Brand | Amana Tool |
| Manufacturer | Amana Tool |
| Height | 1.27 cm (0.5 Inches) |
| Length | 13.97 cm (5.5 Inches) |
| Weight | 0.04 kg (0.08 Pounds) |
| Width | 5.08 cm (2 Inches) |
| Part Number | 47104 |
| Model | 47104 |
Amana Tool - Specifications: diameter d: 1/4 angle a: 60 cutting height b: 31/64 Shank d: 1/4 Overall Length L: 2 B1: 7/32 Flutes: 3. Made in USA. 1/4 inch Shank.
Amana Tool - Solid-carbide insert knife – this cnc tool uses high-grade carbide router bit insert knives for cutting-edge tool performance and blade life. V groove router bit – the industrial v-groove router bit insert was specially designed to be used as a Miter Fold router bit to create the perfect joint and for Signmaking and Lettering.
Amana Tool - This provides longevity and produces cutting results of the highest quality. Naco offers approximately 4, while attractive, 500 Vickers for impressive solid hardne. Advantages of spektra coating: naco coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. Specifications: d Shank: 1/4. Coatings prevents high heat and oxidation which is detrimental to cutting tool performance Multi-colored hues, will dissipate upon use and yet coating will remain fully effective.
Amana Tool - Coatings prevents high heat and oxidation which is detrimental to cutting tool performance Multi-colored hues, will dissipate upon use and yet coating will remain fully effective. This provides longevity and produces cutting results of the highest quality. Specifications: d Shank: 1/4. Naco offers approximately 4, while attractive, 500 Vickers for impressive solid hardne. Advantages of spektra coating: naco coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. Made in USA.
A.G.E. Series - Laser cut Expansion Slots. Precision Ground. Precision, Heavy-Duty. Made in Germany. European Style Carbide Tips.
Amana Tool - Made in USA. Specifications: direction: up-cut d diameter: 1/4 b cutting Height: 3/4 d Shank: 1/4 Overall Length L: 2-1/2 Flutes: 2.
Amana Tool - Carbide tipped, Industrial Quality. Excellent for template work. Cutting diameter 1/2-Inch. 1-inch cutting Height. 1/4-inch Shank.