As an Amazon Associate I earn from qualifying purchases.1. T-Cut
T-Cut RPD010 Rust Magic Pen
T-Cut - T-cut rust magic pen will convert rusty metal to a prepared surface in just 15 minutes. The unique formula will cure rust and prevent further corrosion 10 pens preloaded into CDU.
| Brand | T-Cut |
| Manufacturer | Tetrosyl Group Limited |
| Height | 12 cm (4.72 Inches) |
| Length | 20 cm (7.87 Inches) |
| Width | 2.8 cm (1.1 Inches) |
| Part Number | RPD010 |
| Model | RPD010 |
2. Gtechniq
Rims, High Cling Formula, Sealants, Coatings, Dissolves Fallout, Safe for Use with Waxes, Perfect for Paintwork, Brake Dust and Iron Particles Fast, Gtechniq W6 Iron & General Fallout Remover 500ml
Gtechniq - It provides unbeatable results on wheels and paintwork with embedded brake dust and iron particles, and does not damage previously applied coatings. You can use this fallout removal on your vehicle without the risk of damaging Gtechniq’s sealants, waxes or coatings that you have previously applied. Feel confident when you apply this product, with your car looking like it’s just left the showroom.
Do not allow the product to dry on the surface, then apply Spray W6 directly onto the surface and leave to dwell for 3-5 minutes, and do not apply in direct sunlight. 100% customer satisfaction: we at gtechniq are as passionate about the quality of our products as we are about the assistance and stellar service that we provide to each and every one of our customers. Effective corrosion inhibitor: the w6 iron & general fallout remover is specifically formulated to remove fallout and brake dust, and at the same time boasts a corrosion inhibitor plus, and enjoy a clinically clean finish, which is an additive designed to combat the effects of acid rain.
High-cling formula: the gtechniq w6 iron & general fallout remover is crafted using a thick, it will provide an effective removal of iron particles, gel-like formula that will cling to vertical surfaces so you can be sure that wherever you apply it, brake dust and general fallout.
Removes fallout and brake dust: the gtechniq w6 iron & general fallout remover is a powerful cleaning product that can be used on your vehicle’s paintwork to dissolve fallout and brake dust with ease. Before application, and rinse residue and repeat if necessary. Easy to apply: shake product well before using this product, wear protective gloves, clean and remove loose dirt using a hose or jet wash, during this time ferrous particles will dissolve forming a purple solution. This high-cling fallout removing product offers the safest and most effective method of removing potentially damaging fallout commonly found on your vehicle’s paintwork and rims.
| Brand | Gtechniq |
| Manufacturer | Gtechniq |
| Height | 23.5 cm (9.25 Inches) |
| Length | 6.5 cm (2.56 Inches) |
| Weight | 0.55 |
| Width | 6.5 cm (2.56 Inches) |
| Part Number | W6 0.5 |
| Model | W6 0.5 |
| Warranty | Product must be registered on Gtechniq website |
3. Loctite
Loctite 231051 7503 Rust Neutraliser Bottle for Bodywork, 90ml
Loctite - Ready to paint In Only 24 Hours. Treated area Sandable In 15 Minutes. Volume: 90ml. Ideal for many Automotive And Household Applications.
| Brand | Loctite |
| Manufacturer | Loctite |
| Height | 20.5 cm (8.07 Inches) |
| Length | 11.51 cm (4.53 Inches) |
| Weight | 0.1 |
| Width | 5.99 cm (2.36 Inches) |
| Part Number | LOCRR |
| Model | 231051 |
4. Hammerite
Hammerite 5092809 Kurust Stone Chip Pencil 12.5 ml
Hammerite - No primer or undercoat required. Transforms rust to a clean surface in 15 minutes. Kurust stone chip pencil - 12. 5ml. No primer or undercoat required. Can be top coated after only 3 hours.
Ideal for small areas of rust, stone chips and scratches. Ideal for small areas of rust, stone chips and scratches. Transforms rust to a clean surface in 15 minutes. Can be top coated after only 3 hours. Kurust stone chip pencil - 12. 5ml.
| Brand | Hammerite |
| Manufacturer | Hammerite |
| Height | 0.87 cm (0.34 Inches) |
| Length | 7.87 cm (3.1 Inches) |
| Width | 4.33 cm (1.7 Inches) |
| Part Number | HAM6700059 |
| Model | 5092809 |
5. SONAX
SONAX 05132000 Flash Rust Remover
SONAX - Cleans lime deposits and other dirt from paintwork. Removes aggressive rust deposits and small rust spots from paintwork surfaces. Suitable for removing industrial dust from paintwork and painted plastic surfaces.
| Brand | SONAX |
| Manufacturer | Sonax GmbH |
| Height | 8.8 cm (3.46 Inches) |
| Length | 23.4 cm (9.21 Inches) |
| Weight | 0.62 |
| Width | 5.8 cm (2.28 Inches) |
| Part Number | 513200 |
| Model | 513200 |
6. Adam's Polishes
Adam's Iron Remover 16oz, Changes Color to Purple as it Works, Dissolves Iron Particles Embedded into Paint Surfaces
Adam's Polishes - Acid free formulation! featuring the similar technology as our acid-free wheel cleaner, Iron Remover activates orange iron contamination on the spot to ensure a safer, smoother finish! Protect and remove harmful contamination! bonded iron contamination can embed itself into the surface and cause harm to your vehicle’s fragile finish.
Fresh citrus scent and rich, orange color! many iron cleansers on the market contain an ingredient that can be putrid after repeated use, but Adam’s Iron Remover has a fresh scent that allows you to spend more time spraying and less time inside! 110% satisfaction guarantee and usa made! we pride ourselves on customer service and satisfaction and believe that this is THE BEST Iron Remover on the market! If you don’t agree, we’ll do everything we can to make it right.
Iron remover targets those unwanted items! safe on all painted surfaces, whether ceramic coated or not, including wheels! simply rinse your vehicle down and spray Adam’s Iron Remover to any painted surfaces, and watch as your paint “bleeds” purple and removes the harmful contaminants from your finish!. When using a clay bar to cleanse your paint, you’re only removing the surface contaminants and not the after-effects or below-surface grime.
7. DAIRF
Water Spot, Rust and Scratch Remover, DAIRF 4 Pcs Car Scratch Remover Cloth,Multipurpose Car Cleaning Paint,Strong Decontamination, Surface Polishing
DAIRF - We will help you to solve problems within 24 hours. A reusable helper: clean up and dry the surface of dirty area; wear the gloves; Wipe back and forth the scratches and dirt with the scratch remover cloth. 100% satisfactionif our product has any problems, please feel free to contact us.
If the mark-removing cloth falls off the ground and is covered with dust or sand, please do not use it again. Please put it into the bag and tightly seal after use. Wide-use: for slight scratches such as fingernail scratches near the door handle, paint oxidation, rust stains, asphalt, dirt etc, guano, it helps remove light paint scratches and scuffing of your vehicle, colloid, restore car color and protect paint surfaces.
Warm tips: car scratch repair cloth can not be washed before use to ensure that the repair site has been dry.
Special warning : for the very deep scratches that can be easily felt with your fingertip, swirls, the car scratch removing cloth can remove stains and repair scratches quickly, the product may not help as much. Replace the sealed bag after use spray a little water if it's too dry, which could be used for about 10-15 time. Scratch repair functionsyou can easily fix light scratches, or other marks with our Scratch repair cloth, restoring the original color and shiny appearance.
8. Autoglym
Autoglym 945107155 Magma Liquid Clay 500ml, 500 ml
Autoglym - New 'color transform' technology. Metal particles are loosened. Product reacts with the adhered metal particles.
| Brand | Autoglym |
| Manufacturer | Altro Limited |
| Height | 24 cm (9.45 Inches) |
| Length | 9 cm (3.54 Inches) |
| Weight | 0.6 |
| Width | 3.4 cm (1.34 Inches) |
| Part Number | 945107155 |
| Model | 945107155 |
9. Gtechniq
Coatings, Glue, Quick and Easy To Apply, Sealants, Gtechniq W7 Tar and Glue Remover 500ml, Full Strength Solvent Based Formula, Residue, Safe to Use with Waxes, Softens and Dissolves Tar
Gtechniq - Do not allow w7 to come into contact with plastics, wear protective gloves, and do not apply in direct sunlight. 100% customer satisfaction: we at gtechniq are as passionate about the quality of our products as we are about the assistance and stellar service that we provide to each and every one of our customers. Easy to apply: shake product well before using this product, spray onto an mf1 zeror microfibre buff cloth, and gently wipe the affected area.
If you’ve noticed small black lumps along the bottom skirt of your vehicle, then this removal agent is a must have product to leave your car in pristine condition, looking brand new. Chemically reacts: once sprayed on, you’ll notice brown run marks as the tar dissolves from your vehicle’s paintwork.
Compatible with gtechniq coatings: the gtechniq w7 tar and glue remover is compatible to use on your car in conjunction with any other Gtechniq product. Removes tar and glue with ease: the gtechniq w7 tar and glue remover is a full strength solvent based product that has been specifically designed with an intricate formula to soften and dissolve road tar, and helps remove glue residue.
Please note, waxes or sealants, W7 is not suitable for use on PPF, smart repairs or wrapped vehicles. If your car is heavily soiled spray product directly onto tar spots, or if less soiled, rubber or vinyl – wipe any overspray immediately. As it chemically reacts with the tar, ensuring that your vehicle’s paintwork body finish remains in perfect condition. Whether you’ve already applied any gtechniq coatings, you needn’t worry about damaging the coating with Gtechniq’s W7 Tar and Glue Remover as they have been specifically crafted to work in unison.
| Brand | Gtechniq |
| Manufacturer | Gtechniq |
| Height | 23.5 cm (9.25 Inches) |
| Length | 6.5 cm (2.56 Inches) |
| Weight | 0.55 |
| Width | 6.5 cm (2.56 Inches) |
| Part Number | W7 0.5 |
| Model | W7 0.5 |
| Warranty | Product must be registered on Gtechniq website |
Gtechniq - It provides unbeatable results on wheels and paintwork with embedded brake dust and iron particles, and does not damage previously applied coatings. You can use this fallout removal on your vehicle without the risk of damaging Gtechniq’s sealants, waxes or coatings that you have previously applied. Feel confident when you apply this product, with your car looking like it’s just left the showroom.
SONAX - Cleans lime deposits and other dirt from paintwork. Removes aggressive rust deposits and small rust spots from paintwork surfaces. Suitable for removing industrial dust from paintwork and painted plastic surfaces.
Adam's Polishes - Acid free formulation! featuring the similar technology as our acid-free wheel cleaner, Iron Remover activates orange iron contamination on the spot to ensure a safer, smoother finish! Protect and remove harmful contamination! bonded iron contamination can embed itself into the surface and cause harm to your vehicle’s fragile finish.
DAIRF - We will help you to solve problems within 24 hours. A reusable helper: clean up and dry the surface of dirty area; wear the gloves; Wipe back and forth the scratches and dirt with the scratch remover cloth. 100% satisfactionif our product has any problems, please feel free to contact us.
Autoglym - New 'color transform' technology. Metal particles are loosened. Product reacts with the adhered metal particles.
Gtechniq - Do not allow w7 to come into contact with plastics, wear protective gloves, and do not apply in direct sunlight. 100% customer satisfaction: we at gtechniq are as passionate about the quality of our products as we are about the assistance and stellar service that we provide to each and every one of our customers. Easy to apply: shake product well before using this product, spray onto an mf1 zeror microfibre buff cloth, and gently wipe the affected area.
